Watch Winder Direction and Settings for Brior watches
The Brior company was founded, in 2000, by Holger Wecker in Germany. The name was chosen from Briar wood, which they use in their watches, and Or, the French word for gold. Because of the structure of wood, the wood grains are always different which makes each Brior watch unique.
Their collection consists of moon phases, chronographs and skeleton watches. All the movements are Swiss made, water resistant to 30 meters and mounted in a protective metal container which is then encased in wood.
Most Brior watch self-winding movements can be wound properly by most watch winder boxes. Usually Brior’s self-winding movements need to rotate 650 - 800 revolutions per day, and most of them can be wound clockwise. So please take some time and like to choose a cute clockwork that suits you and your watch.
Definitions:
- 《CW》 - Clockwise winding direction;
- 《CCW》 - Counterclockwise winding direction;
- 《Both》 - Combined mode (Clockwise + Counterclockwise);
- 《–》 - Undefined;
MODEL, DESCRIPTION | MOVEMENT / CALIBER | WINDING DIRECTION | TURNS PER DAY (TPD) |
---|---|---|---|
Cavalletto Automatic: C 32412, C 32422 | ETA 2892 | Both | 650 |
Cavalletto Chrono Automatic: C 312432 | ETA 7751 | CW | 800 |
Diamond Date Automatic: TE 11042, TE 11242, TE 11343, TE 11545 | ETA 2824-2 | Both | 650 |
Mammut Automatic: M23112, M 23122 | ETA 2892 | Both | 650 |
Perla Automatic: P 32410, P 32420 | ETA 2892 | Both | 650 |
Robello Automatic: R 11232, R 11309, R 13229 | ETA 2824-2 | Both | 650 |
Robello Va Bene | Both | 650 | |
Skelett | Both | 800 | |
Tarlo Automatic: T 22111, T 22121, T 32411, T 32421 | ETA 2892 | Both | 650 |
Tarlo Chrono Automatic: T 12431 | ETA 7751 | CW | 800 |
Tarlo Fin Calandrier: T 23111, T 23121 | ETA 2892 | Both | 650 |
Tempio Automatic: TE 32412, TE 32422 | ETA 2892 | Both | 650 |
Tempio Diamond Date: TE 11545 | ETA 2824-2 | Both | 650 |
Tempio Va Bene Automatic: TE 33212, 33412 | ETA 2892 | Both | 650 |
If you could not find your watch model (or caliber) in this table, you may determine your Brior. winding mode on a trial basis. You should select the combined winding mode (CW+CCW) and the minimal number of turns per day (TPD). Then place your watch into the automatic watch winder and check after a few days how accurate your watch shows the time. If it runs behind, it is necessary to increase the number of TPD by one step.