How to Adjust the Deployment Buckle Watch Band of a Steel Band Watch
Remove the securing pegs. Find the strap section you want to disassemble and push out the pegs inside in the direction of the arrow printed on the back of the strap.
Use a little force. Both hands hold the two strap sections with the pegs removed. Gently pull up on the strap section near the dial. Slightly lower the end near the clasp. The buckles between the strap sections are released.
Do not let go after the buckle is opened, and then pull. until it is fully opened.
Separate the strap section. After opening the buckle, feed the section close to the buckle towards the dial. The two strap sections are completely separated.
Follow the steps above to carefully remove the excess strap section. Be careful not to damage the strap. Reinstall the strap. Just follow the previous steps and put it back upside down.
