Roroos Walnut Wood Double Watch Winder — for Rolex, Omega, and All Automatics

Walnut Wood Sides, Aluminum Frame — A Different Kind of Double Winder

Combine three materials in a single case: warm walnut wood grain panels on the sides and back, a precision-cut aluminum alloy frame that runs the full perimeter of the front face and base, and a high-transparency glass door. The result reads as furniture rather than gadgetry — place it on a mahogany desk, a dressing table, or a watch boutique display shelf without it looking out of place. See the full range of solid wood watch winders for more walnut, ebony, and retro finishes across single to 12-slot capacities.

Two Independent Slots — Full Control Per Watch

Each slot has its own chrome mode selector knob on the front panel, labelled independently. Set the left slot to Mode 4 (650 TPD bidirectional, the standard setting for Rolex) and the right slot to Mode 5 (1,950 TPD extended cycle, suitable for Breitling or IWC) — both run simultaneously without one slot affecting the other.

Silent Operation

Engineered with a quiet motor, the winder operates silently, making it suitable for use in any environment without causing disturbance. Enjoy the peace of mind that comes with knowing your watches are being cared for without any noise.

Simple rotation settings

Select your winding program using the chrome knob on the front panel. Rotate to cycle through five modes:

• Mode 1 — OFF: Motor stopped. Watch sits stationary in the lit cradle.
• Mode 2 — Clockwise (CW): Rotates clockwise for 2 minutes, rests for 6 minutes. Repeats continuously.
• Mode 3 — Counter-Clockwise (CCW): Rotates counterclockwise for 2 minutes, rests for 6 minutes. Repeats.
• Mode 4 — Bidirectional (CW+CCW): Clockwise for 2 minutes, rest 6 minutes, counterclockwise for 2 minutes, rest 6 minutes. Repeats.
• Mode 5 — Extended Cycle: Clockwise 5 minutes, counterclockwise 5 minutes alternating over a 3-hour active period, then rests for 9 hours. Repeats.

Rear USB-C Port — Cable Routes Away from the Front Face

Power the winder via the USB-C port on the rear panel. The rear-entry cable keeps the walnut side panels and front face completely free of visible cabling when you place the case against a wall or inside a display cabinet. Use any USB-C charger or hub — the cable ships in the box, and no proprietary adapter is needed. This model requires continuous power. If you need a double winder that runs inside a closed safe without any cable, the battery-powered leather double winders operate on standard batteries for 4–6 weeks per set.

Fit Most Watches

The watch cradle uses a memory foam compression pillow rather than a rigid fixed holder. Press the pillow inward to compress it, slide your watch strap around it, and release — the foam expands to grip the strap at exactly the tension needed to hold the watch securely during rotation without putting pressure on the case or crystal. The pillow accommodates wrist circumferences from 6 inches (150 mm) to 8.5 inches (215 mm), covering men's and women's watches from slim dress pieces to oversized sports models up to approximately 46 mm case diameter.

The Perfect Gift

Whether you’re a seasoned collector or just starting your horological journey, this winder offers the ultimate blend of luxury and utility.

Overwind Protection and Sleep Mode

The winder includes automatic overwind protection — the motor monitors resistance and pauses when it detects a fully wound mainspring, then resumes the rest cycle. No automatic watch can be overwound by this winder. Sleep mode in Mode 5 provides a 9-hour rest window that mirrors the recovery period recommended for movements with high-torque winding rotors.

This is a double watch winder — two slots, two programs. Step up to the walnut wood quad winder for four slots in the same material design. Step down to a single watch winder if you wind one automatic piece at a time. Confirm the right TPD setting for each of your movements using the TPD settings guide.