Walnut Wood Quad Watch Winder with Four Blue LED Rings and USB-C Power

Four Slots, Walnut Wood Sides, Aluminum Frame — Built for a Growing Collection

This watch winder winds four automatic watches simultaneously inside a case built from the same material language as the rest of the Roroos walnut series: warm walnut wood grain on the side panels and rear face, a precision aluminum alloy frame around the front glass door and base, and a matte black lid and trim. At this capacity, the case reads less like an accessory and more like a small cabinet — the kind of object that sits permanently on a dresser or study shelf rather than being tucked away.

The four winding cradles are arranged in a 2×2 grid behind a single full-width glass door, each with its own blue LED ambient ring. The rear panel carries the same walnut grain as the sides, with the USB-C power input recessed cleanly into the lower section — no visible cabling from any front or side viewing angle.

Four Slot Control Knobs — Four Independent Programs for Four Watches

The front panel has two mode selector knobs, positioned between the four winding cradles. Each knob controls one pair of diagonally paired slots, so you can run two different winding programs across the four watches — for example, Mode 4 (650 TPD bidirectional, the standard setting for Rolex) on one pair and Mode 5 (1,950 TPD extended cycle, suitable for Breitling or IWC) on the other pair, simultaneously.

Walnut Wood Side Panels and Aluminum Alloy Frame

The walnut wood grain wraps the left side, right side, and rear face of the case in a single continuous material. The lid and front trim use a matte black finish, while the aluminum alloy frame runs the full perimeter of the front glass door and along the base — the same metal-and-wood material pairing used throughout the Roroos walnut collection. For more options in this material family, see the full range of solid wood watch winders, including ebony, walnut, and retro finishes across single to 12-slot capacities.

Silent Operation

Engineered with a quiet motor, the winder operates silently, making it suitable for use in any environment without causing disturbance. Enjoy the peace of mind that comes with knowing your watches are being cared for without any noise.

Simple rotation settings

Select your winding program using the chrome knob on the front panel. Rotate to cycle through five modes:

• Mode 1 — OFF: Motor stopped. Watch sits stationary in the lit cradle.
• Mode 2 — Clockwise (CW): Rotates clockwise for 2 minutes, rests for 6 minutes. Repeats continuously.
• Mode 3 — Counter-Clockwise (CCW): Rotates counterclockwise for 2 minutes, rests for 6 minutes. Repeats.
• Mode 4 — Bidirectional (CW+CCW): Clockwise for 2 minutes, rest 6 minutes, counterclockwise for 2 minutes, rest 6 minutes. Repeats.
• Mode 5 — Extended Cycle: Clockwise 5 minutes, counterclockwise 5 minutes alternating over a 3-hour active period, then rests for 9 hours. Repeats.

Time Never Stopped

Equipped with a USB Type-C power input, it offers ultimate flexibility. Plug it into your laptop, a power bank, or a wall adapter—perfect for the minimalist desk setup or for keeping your watch wound inside a safe.

Fit Most Watches

The watch cradle uses a memory foam compression pillow rather than a rigid fixed holder. Press the pillow inward to compress it, slide your watch strap around it, and release — the foam expands to grip the strap at exactly the tension needed to hold the watch securely during rotation without putting pressure on the case or crystal. The pillow accommodates wrist circumferences from 6 inches (150 mm) to 8.5 inches (215 mm), covering men's and women's watches from slim dress pieces to oversized sports models up to approximately 46 mm case diameter.

The Perfect Gift

Whether you’re a seasoned collector or just starting your horological journey, this winder offers the ultimate blend of luxury and utility.

Overwind Protection and Sleep Mode

The winder includes automatic overwind protection — the motor monitors resistance and pauses when it detects a fully wound mainspring, then resumes the rest cycle. No automatic watch can be overwound by this winder. Sleep mode in Mode 5 provides a 9-hour rest window that mirrors the recovery period recommended for movements with high-torque winding rotors.

This winder is a quad watch winder — four slots, two independent programs. If you own three or more automatic watches requiring simultaneous winding, see the triple watch winder or 6 watch winder collections. For more solid wood watch winders in ebony, walnut, and retro finishes across single to 12-slot capacities, see the full wooden winder range.