Product Description
This high-end 4 watch winder holds up to four watches, it do can meet your any expectations and needs.
- Material Wood
- Glass Material Acrylic
- Storage For 4 watch(es)
- Interior colour Almond
- Width 33.5 cm
- Height 20.5 cm
- Depth 18.5 cm
- Motor type Japanese
- Winding direction CCW, CW, CW+CCW
- Power Supply Adapter + Battery
- LCD Display No
- LED Lightning No
- Noiseless Yes
- Overwind Protection Yes
- Sleep Mode Yes
Wind Four Watches at Once — in Premium Ebony Wood
The Roroos Ebony 4-Watch Winder is built for the serious collector who refuses to compromise on capacity, material, or silence. Two independent winding cradles keep your entire rotation of daily-wear watches ready at any moment, while the genuine ebony wood exterior turns functional storage into a collector's display. This is our flagship entry in the 4 watch winder category for those who value both craft and capability.
What Sets This 4-Watch Winder Apart
Four Truly Independent Winding Modules
Each cradle operates on its own motor and control settings. Wind your Rolex GMT-Master bidirectionally at 650 TPD while simultaneously winding your Omega Speedmaster clockwise at 800 TPD — no compromises, no shared programming. Not sure of your watch's TPD requirement? Use our automatic watch winding guide to configure the right settings.
Near-Silent Motor — Bedroom-Friendly
The Japanese motor runs at near-inaudible levels. Collectors in Singapore who store their winder on a bedside table report zero sleep disruption. The ebony wood casing further dampens vibration to deliver an exceptionally quiet experience.
Ebony Wood — Built for Display
Ebony is one of the densest and most visually striking woods available in fine watch storage. The rich, deep grain elevates this wooden watch winder from a utility device to a shelf centrepiece that complements any watch collection.
Suede Interior for Scratch-Free Storage
The cushioned suede lining protects case, crystal, and bracelet from abrasion during every rotation cycle. Even the most delicate bracelet finishes — polished Rolex Oyster or brushed Omega Milanese — stay pristine inside this winder.
Watches This Winder Is Designed For
This winder accommodates watches with case diameters from 34 mm to 47 mm and fits both rubber, leather, and metal bracelets. It performs optimally with:
- Rolex Submariner, GMT-Master II, Datejust, Day-Date
- Omega Seamaster, Constellation, Speedmaster Automatic
- IWC Pilot, Portugieser
- Patek Philippe Aquanaut, Calatrava (automatic models)
- Tudor Black Bay series
- Super Compact
- Measures just 32cm (L) x 18m (W) x 19cm (H)
- Super Quiet Motor to Safeguard Your Sound Sleep
- Roroos watch winder uses Japanese upgraded mabuchi motor, control tiresome noise below 5 db, offers extremely quiet, stable running and long life. A literally noise-free winder that you can place it in your bedroom.
- Independent Motor to Each Watch for Better Work
- Give each watch a customized and steady motion, more professional and precise, especially works for delicate and heavy watches, no interfere and scratch to your prized watches.
- Multiple Rotation Settings
- Clockwise, counterclockwise or alternating. Fit for All Size of Your Watches
- With high quality flexible soft pillows, more luxury, premium and exclusive, no matter women's small size or men's oversized watch, the mechanical automatic watch winder is able to hold it. This Rotation Area can fit 4 watches, and thickness reach to max 13 mm. The perimeter of the watch band is up to 170 mm (6.7 inch).
- Dual Power Supply More Reasonable
- Runs on batteries (2 *1.5V Battery), as well as normal household AC power (AC adapter is included, 100 volt to 240 volt, fit any country's voltage requirement)
- Anti-magnetization
- Anti-magnetic design keeps your watch running with precision and makes your watch safer in the watch winder box. It has large enough space to rotate your watch ,so please do not worry it hit your watch.
- Exquisite Workmanship
OPERATION
- Step 1- Choose a position where your watch winder can stand safely and upright, make sure it on a horizontal surface in order to allow the optimum operation.
- Step 2- Remove the cushion from the watch winder. After inserting your watch (watch dial facing outwards) on the cushion.
- Step 3- Plug the 3V 1.2A power adapter into the backside of watch winder.
-
Step 4- Select rotation direction mode your watch requires. You can choose clockwise(↻), counter- clockwise(↺) , alternately clockwise/ counter-clockwise(Ω) or Clockwise + Counter-Clockwise (Ω)on the controller panel. Your watch manufacturer can provide the guidance here.
To stop the winder rotating, turn the controller to “OFF” position.
POWER SUPPLY SPECIFICATIONS
Power adapter: 100V-240V, 50 / 60 Hz Input, 3V 1.2A Output
The battery comartment is locate in the bottom of watch winder (If the product you choose supports battery power supply). Battery Required: 2pcs 1.5V battery (not included).
FEATURES
- Mode1: OFF;
- Mode2: Rotate 4 minutes 30 second Clockwise. Rest for 55 minutes 30 second. Repeat;
- Mode3: Rotate 4 minutes 30 second Counter-Clockwise. Rest for 55 minutes 30 second. Repeat;
- Mode4: Rotate 4 minutes Clockwise. Rest for 26 minutes. Rotate 4 minutes Counter-Clockwise. Rest for 26 minutes. Repeat;
- Mode5: Rotate 6 minutes Clockwise. Rest for 24 minutes. (work 4 hours, rest 8 hours), Rotate 4 minutes 30 second Counter- Clockwise. Rest for 55 mintutes 30 second (work 4 hours, rest 8 hours);
- 5 direction of rotation modes: OFF, Clockwise Mode; Counter-Clockwise Mode; alternating and Clockwise + Counter- Clockwise Mode;
- Ultra-quiet motor with optimal 7.5 turns (+-0.5 turns) per minute;
- Pre-engineered ‘rest & sleep cycle’ to protect the mainspring of your watch from over-winding;
IMPORTANT NOTES
- Before operating the watch winder, please contact your watch manufacturer for the information of TPD (turns per day) and rotation direction requirement of your watch.
- Please do not manually spin the winder because it will damage your watch winder.
- Please remove the power adapter when the watch winder is not used for a long time.
- Please turn off the watch winder before inserting or removing the watch.
- Please DO NOT block the rotator when the watch winder is moving.
- Keep children under 8 years of age away from the watch winder and power cables. Children shall not play with the units.
- Keep the watch winder away from the high magnetic object.
- Do not place the product under the sun or humid places.
- Specifications subject to change without notice in accordance with our policy of continuous product improvement.
MAINTENANCE AND CARE
- Use a microfiber cloth or lint-free cloth to clean the watch winder surface with circular movements. Do NOT placing your winder in direct sunlight.
- Clean the interior regularly with a brush by brushing in the direction of the grain. DO NOT use vacuum cleaners or anywet cleaning tools.
- The motor and electronic pats do not require any maintenanceto ensure the fault-free functions.
TROUBLESHOOTING
There are some factors which generally affect the effectiveness of the winder:
- 1.Check the watch placement in the winder, Your watch should be placed with the dial facing up in the winder.
- 2.Some watches must be fully wound before place into our winder as the power reserve may not be enough to keep the watch wound when removed from your wrist. Please refer to your instruction manual on how to manually wind your watch.
- 3.Please wind your watch manually before placing it into the winder, In some cases, due to the watch design, a steeper winding angle is required .You can prop the back of winder using a book or magazine to increase the angle of the turntable then test the wind again. The vertical the better the chance of the test being accurate.
An associate will contact you soon regarding product availability.
