Product Description
Roroos Quad & 6 storages rolex watch winder box with very quiet Japanese Mabuchi Motor, noise down to 5 db and won't disturb your sleep or work. Operated either by AC mains or two AA batteries, soft & flexible plush pillow fit for all sizes of your watches.
- Material Wood
- Glass Material Acrylic
- Storage For 10 watch(es)
- Interior colour Black
- Width 35 cm
- Height 22.5 cm
- Depth 26 cm
- Minimum wrist circumference 15.5cm
- Maximum Wrist Circumference 20cm
- Additional Functions Lockable, Storage
- Motor type Japanese
- Winding direction CCW, CW, CW+CCW
- Power Supply Adapter + Battery
- LCD Display No
- LED Lightning Yes
- Noiseless Yes
- Overwind Protection Yes
- Sleep Mode Yes
The Roroos 4-slot automatic watch winder box keeps four automatic watches wound at all times while storing six additional timepieces in padded display compartments. The piano-gloss black exterior suits any bedroom dresser, home office shelf, or dedicated watch room in Singapore.
Why This Watch Winder Box Suits Rolex, Omega & Multi-Watch Collections
Each of the four winding modules operates independently, so you can set different turns-per-day (TPD) values, rotation directions, and rest cycles for each watch. This level of per-slot customisation ensures your Rolex Submariner, Omega Seamaster, TAG Heuer Carrera, or Breitling Chronomat each receive the exact winding profile their movement requires — all from a single, compact cabinet.
Japanese Mabuchi Motor — Under 5dB Noise Level
The upgraded Japanese Mabuchi motor produces less than 5 decibels during continuous operation — quieter than a whisper. You can place this automatic watch winder box in your bedroom without disrupting sleep.
Six Cushioned Storage Compartments
The six watch storage bays each hold a watch on an adjustable, scratch-free leather pillow. The compartments accommodate both men's large-diameter sports watches and women's smaller dress watches. A clear acrylic display door keeps dust out while keeping every piece on full show.
Dual Power Supply — AC Adapter & Battery Backup
The winder runs on the included 100–240V AC adapter — compatible with Singapore's 230V mains — or on two 1.5V AA batteries (not included) for travel or power-outage continuity. Anti-magnetisation shielding protects every movement from magnetic interference during rotation.
- Specifications at a glance
-
Winding slots: 4 | Storage slots: 6 | Finish: Piano gloss black
Motor: Ultra-quiet | Power: AC adapter included / Battery not included
Compatible with: Rolex, Omega, TAG Heuer, Breitling, Seiko and all standard automatic movements.
- Super Compact
- Measures just 34cm (W) x 26cm (L) x 21cm (H)
- Super Quiet Motor to Safeguard Your Sound Sleep
- Roroos watch winder uses Japanese upgraded mabuchi motor, control tiresome noise below 5 db, offers extremely quiet, stable running and long life. A literally noise-free winder that you can place it in your bedroom.
- Independent Motor to Each Watch for Better Work
- Give each watch a customized and steady motion, more professional and precise, especially works for delicate and heavy watches, no interfere and scratch to your prized watches.
- Multiple Rotation Settings
- Clockwise, counterclockwise or alternating.
- Fit for All Size of Your Watches
- With high quality flexible soft pillows, more luxury, premium and exclusive, no matter women's small size or men's oversized watch, the mechanical automatic watch winder is able to hold it. This Rotation Area can fit 4 watches, and thickness reach to max 13 mm. The perimeter of the watch band is up to 170 mm (6.7 inch).
- Dual Power Supply More Reasonable
- Can be operated either by AC mains or two 1.5V batteries.
- Anti-magnetization
- Anti-magnetic design keeps your watch running with precision and makes your watch safer in the watch winder box. It has large enough space to rotate your watch ,so please do not worry it hit your watch.
Looking for a Different Size or Finish?
Browse the ebony wood finish version of this same box, explore our full range of 4-slot watch winders, or step down to a double watch winder with 3 storage bays. Need more capacity? See our 8+ watch winder cabinets.
OPERATION
- Step 1- Choose a position where your watch winder can stand safely and upright, make sure it on a horizontal surface in order to allow the optimum operation.
- Step 2- Remove the cushion from the watch winder. After inserting your watch (watch dial facing outwards) on the cushion.
- Step 3- Plug the 3V 1.2A power adapter into the backside of watch winder.
-
Step 4- Select rotation direction mode your watch requires. You can choose clockwise(↻), counter- clockwise(↺) , alternately clockwise/ counter-clockwise(Ω) or Clockwise + Counter-Clockwise (Ω)on the controller panel. Your watch manufacturer can provide the guidance here.
To stop the winder rotating, turn the controller to “OFF” position.
Video tutorial
POWER SUPPLY SPECIFICATIONS
Power adapter: 100V-240V, 50 / 60 Hz Input, 3V 1.2A Output
The battery comartment is locate in the bottom of watch winder (If the product you choose supports battery power supply). Battery Required: 2pcs 1.5V battery (not included).
FEATURES
- Mode1: OFF;
- Mode2: Rotate 2 minutes Clockwise. Rest for 6 minutes. Repeat;
- Mode3: Rotate 2 minutes Counter-Clockwise. Rest for 6 minutes. Repeat;
- Mode4: Rotate 2 minutes Clockwise. Rest for 6 minutes. Rotate 2 minutes Counter-Clockwise. Rest for 6 minutes. Repeat;
- Mode5: Clockwise rotation for 5 minutes. alternating counter-clockwise rotation for 5 minutes (3-hour period), rest for 9 hours. Repeat;
- 5 direction of rotation modes: OFF, Clockwise Mode; Counter-Clockwise Mode; alternating and Clockwise + Counter- Clockwise Mode;
- Ultra-quiet motor with optimal 7.5 turns (+-0.5 turns) per minute;
- Pre-engineered ‘rest & sleep cycle’ to protect the mainspring of your watch from over-winding;
IMPORTANT NOTES
- Please do not manually spin the winder because it will damage your watch winder.
- Please remove the power adapter when the watch winder is not used for a long time.
- Please turn off the watch winder before inserting or removing the watch.
- Please DO NOT block the rotator when the watch winder is moving.
- Keep children under 8 years of age away from the watch winder and power cables. Children shall not play with the units.
- Keep the watch winder away from the high magnetic object.
- Do not place the product under the sun or humid places.
- Specifications subject to change without notice in accordance with our policy of continuous product improvement.
MAINTENANCE AND CARE
- Use a microfiber cloth or lint-free cloth to clean the watch winder surface with circular movements. Do NOT placing your winder in direct sunlight.
- Clean the interior regularly with a brush by brushing in the direction of the grain. DO NOT use vacuum cleaners or anywet cleaning tools.
- The motor and electronic pats do not require any maintenanceto ensure the fault-free functions.
TROUBLESHOOTING
There are some factors which generally affect the effectiveness of the winder:
- 1.Check the watch placement in the winder, Your watch should be placed with the dial facing up in the winder.
- 2.Some watches must be fully wound before place into our winder as the power reserve may not be enough to keep the watch wound when removed from your wrist. Please refer to your instruction manual on how to manually wind your watch.
- 3.Please wind your watch manually before placing it into the winder, In some cases, due to the watch design, a steeper winding angle is required .You can prop the back of winder using a book or magazine to increase the angle of the turntable then test the wind again. The vertical the better the chance of the test being accurate.
New
Hot
New
An associate will contact you soon regarding product availability.
