Roroos Walnut Wood Double Watch Winder

Walnut Wood Sides, Aluminum Frame — A Different Kind of Double Winder

The Roroos Walnut Wood Double Watch Winder combines three materials in a single case: warm walnut wood grain panels on the sides and back, a precision-cut aluminum alloy frame that runs the full perimeter of the front face and base, and a high transparency glass lid. The result is a double watch winder that reads as furniture rather than gadgetry — it sits equally well on a mahogany desk in a study, a dressing table in a bedroom, or a display shelf in a watch boutique.

Two Independent Slots — Full Control Per Watch

Each slot has its own chrome mode selector knob on the front panel, labelled independently. Set the left slot to Mode 4 (650 TPD bidirectional, the standard setting for Rolex) and the right slot to Mode 5 (1,950 TPD extended cycle, suitable for Breitling or IWC) — both run simultaneously without one slot affecting the other.

Silent Operation

Engineered with a quiet motor, the winder operates silently, making it suitable for use in any environment without causing disturbance. Enjoy the peace of mind that comes with knowing your watches are being cared for without any noise.

Simple rotation settings

Select your winding program using the chrome knob on the front panel. Rotate to cycle through five modes:

• Mode 1 — OFF: Motor stopped. Watch sits stationary in the lit cradle.
• Mode 2 — Clockwise (CW): Rotates clockwise for 2 minutes, rests for 6 minutes. Repeats continuously.
• Mode 3 — Counter-Clockwise (CCW): Rotates counterclockwise for 2 minutes, rests for 6 minutes. Repeats.
• Mode 4 — Bidirectional (CW+CCW): Clockwise for 2 minutes, rest 6 minutes, counterclockwise for 2 minutes, rest 6 minutes. Repeats.
• Mode 5 — Extended Cycle: Clockwise 5 minutes, counterclockwise 5 minutes alternating over a 3-hour active period, then rests for 9 hours. Repeats.

Time Never Stopped

Equipped with a USB Type-C power input, it offers ultimate flexibility. Plug it into your laptop, a power bank, or a wall adapter—perfect for the minimalist desk setup or for keeping your watch wound inside a safe.

Fit Most Watches

The watch cradle uses a memory foam compression pillow rather than a rigid fixed holder. Press the pillow inward to compress it, slide your watch strap around it, and release — the foam expands to grip the strap at exactly the tension needed to hold the watch securely during rotation without putting pressure on the case or crystal. The pillow accommodates wrist circumferences from 6 inches (150 mm) to 8.5 inches (215 mm), covering men's and women's watches from slim dress pieces to oversized sports models up to approximately 46 mm case diameter.

The Perfect Gift

Whether you’re a seasoned collector or just starting your horological journey, this winder offers the ultimate blend of luxury and utility.

Overwind Protection and Sleep Mode

The winder includes automatic overwind protection — the motor monitors resistance and pauses when it detects a fully wound mainspring, then resumes the rest cycle. No automatic watch can be overwound by this winder. Sleep mode in Mode 5 provides a 9-hour rest window that mirrors the recovery period recommended for movements with high-torque winding rotors.

This winder is a double watch winder — two slots, two independent programs. If you own three or more automatic watches requiring simultaneous winding, see the triple watch winder or quad watch winder collections. For more solid wood watch winders in ebony, walnut, and retro finishes across single to 12-slot capacities, see the full wooden winder range.