Carbon Fiber Double Watch Winder with Floating LED and USB-C Power

Two Independent Slots — One Carbon Fiber Case

The winder gives you two fully independent winding programs inside a single carbon fiber case. Each slot has its own mode selector knob on the front panel — you set the rotation direction and cycle for each watch separately, without one slot affecting the other. Run your Rolex at 650 TPD bidirectional in the left slot while your Omega Speedmaster runs an extended 1,950 TPD cycle in the right slot, both simultaneously, both independently.

This is the practical advantage of the Roroos 2-watch winder over double winders with a single shared motor: two collectors wearing two different brands, or one collector rotating between an everyday watch and a sport chronograph with different winding needs, get exactly the right settings for each piece without compromise. For a full explanation of the correct TPD settings for your specific movements, use the Roroos TPD settings guide.

Silent Operation

Engineered with a quiet motor, the winder operates silently, making it suitable for use in any environment without causing disturbance. Enjoy the peace of mind that comes with knowing your watches are being cared for without any noise.

Simple rotation settings

Select your winding program using the chrome knob on the front panel. Rotate to cycle through five modes:

• Mode 1 — OFF: Motor stopped. Watch sits stationary in the lit cradle.
• Mode 2 — Clockwise (CW): Rotates clockwise for 2 minutes, rests for 6 minutes. Repeats continuously.
• Mode 3 — Counter-Clockwise (CCW): Rotates counterclockwise for 2 minutes, rests for 6 minutes. Repeats.
• Mode 4 — Bidirectional (CW+CCW): Clockwise for 2 minutes, rest 6 minutes, counterclockwise for 2 minutes, rest 6 minutes. Repeats.
• Mode 5 — Extended Cycle: Clockwise 5 minutes, counterclockwise 5 minutes alternating over a 3-hour active period, then rests for 9 hours. Repeats.

Time Never Stopped

Equipped with a USB Type-C power input, it offers ultimate flexibility. Plug it into your laptop, a power bank, or a wall adapter—perfect for the minimalist desk setup or for keeping your watch wound inside a safe.

Fit Most Watches

The watch cradle uses a memory foam compression pillow rather than a rigid fixed holder. Press the pillow inward to compress it, slide your watch strap around it, and release — the foam expands to grip the strap at exactly the tension needed to hold the watch securely during rotation without putting pressure on the case or crystal. The pillow accommodates wrist circumferences from 6 inches (150 mm) to 8.5 inches (215 mm), covering men's and women's watches from slim dress pieces to oversized sports models up to approximately 46 mm case diameter.

The Perfect Gift

Whether you’re a seasoned collector or just starting your horological journey, this winder offers the ultimate blend of luxury and utility.

Overwind Protection and Sleep Mode

The winder includes automatic overwind protection — the motor monitors resistance and pauses when it detects a fully wound mainspring, then resumes the rest cycle. No automatic watch can be overwound by this winder. Sleep mode in Mode 5 provides a 9-hour rest window that mirrors the recovery period recommended for movements with high-torque winding rotors.

This is a double watch winder — two slots, two independent programs, one case. If you own three or more automatic watches requiring simultaneous winding, see the triple watch winder or quad watch winder collections. If you prefer the same dual-LED carbon fiber design in a single-slot format, the Carbon Fiber Single Watch Winder (SKU: SIN0C-C-SK) is the single-slot version of this series.